CubePilot Power Selection Module

The Power Selection Module (PSM) chooses between redundant power sources for your autopilot system, so subsystems can fail gracefully if one supply drops out.

• Power inputs must be between 4.4 V and 5.7 V
• Output is the same voltage as the selected input
• Power can be taken off the PSM in different ways, letting different subsystems fail gracefully
• Also houses the buzzer controller
• Aux power input has a Zener clamp at 5.6 V, protected from continuous over-voltage by a fuse and FET
• Made in Taiwan

Genuine CubePilot hardware supplied by Rising Sun FPV, an authorised CubePilot reseller.