- Email: [email protected]
This new 6 ports 1S battery charger supports PH2.0 and BT2.0 at the same time. Moreover, the charging is faster when using 30W adapter.Compact, fast-charging, and portable, choosing a 1S battery charger that best suits your needs will no longer be difficult with this 6 Ports 1Scharger & adapter.
The 30W power adapter supports multi-chargingprotocols including PD3.0 /QC3.0/ BC1.2, equipped with 6 ports 1S battery charger with a maximum charging current of 1A, which makes charging faster. 6pcsBT2.0 300mAh 1S batteriescan be fullycharged in about 25 minutes.
Charging will take significantly longer when using adapters below 30W or standard 5V/2A adapters, as each charging port receives less than 1A of current when all six ports are operating simultaneously. Note that some manufacturer-specific adapters (including certain Apple, Xiaomi, vivo, and OPPO models) may not support PD fast charging. For optimal performance, we strongly recommend using a 30W or higher PD fast-charge adapter.
Thefunctionofthebuttonistoswitchthe chargevoltage:4.35V.
The new batches' switch left side changes the "4.2V" to "OFF" as shown above.
Green LED lights indicate the charging status of each battery slot.
Status | Description |
Green light flashes | Nobatterydetected |
Green light on | Charging |
Light off | Chargingcompleted |
Note:If the indicator light is off when no battery is connected to an output port, this indicates a faulty charging circuit - the port should not be used for charging.
Orange LED light reveals charging mode.
Status | Description |
Orange light on | Low-power charging |
Light off | Fast charging active |
Recommendation: For fast charging, use a power adapter rated 30W.
OR
This new 6 ports 1S battery charger supports PH2.0 and BT2.0 at the same time. Moreover, the charging is faster when using 30W adapter.Compact, fast-charging, and portable, choosing a 1S battery charger that best suits your needs will no longer be difficult with this 6 Ports 1Scharger & adapter.
The 30W power adapter supports multi-chargingprotocols including PD3.0 /QC3.0/ BC1.2, equipped with 6 ports 1S battery charger with a maximum charging current of 1A, which makes charging faster. 6pcsBT2.0 300mAh 1S batteriescan be fullycharged in about 25 minutes.
Charging will take significantly longer when using adapters below 30W or standard 5V/2A adapters, as each charging port receives less than 1A of current when all six ports are operating simultaneously. Note that some manufacturer-specific adapters (including certain Apple, Xiaomi, vivo, and OPPO models) may not support PD fast charging. For optimal performance, we strongly recommend using a 30W or higher PD fast-charge adapter.
Thefunctionofthebuttonistoswitchthe chargevoltage:4.35V.
The new batches’ switch left side changes the “4.2V” to “OFF” as shown above.
Green LED lights indicate the charging status of each battery slot.
|
Status |
Description |
|
Green light flashes |
Nobatterydetected |
|
Green light on |
Charging |
|
Light off |
Chargingcompleted |
Note:If the indicator light is off when no battery is connected to an output port, this indicates a faulty charging circuit – the port should not be used for charging.
Orange LED light reveals charging mode.
|
Status |
Description |
|
Orange light on |
Low-power charging |
|
Light off |
Fast charging active |
Recommendation: For fast charging, use a power adapter rated 30W.
OR
There are no reviews yet. Be the first to review this product!
Add a review
Your email address will not be published. Required fields are marked *