Phrozen Water-Washable Tough 3D Printing Resin

Squeaky Clean With Up to 90% Less Alcohol

Reduce alcohol consumption by up to 90% when printing with Water-Washable Tough. Simply clean with Phrozen Washing Station and water, it’s safer, less hassle, and friendlier to your wallet!

A Tougher Water-Washable*

While water-washable resin is known to be brittle, our Water-Washable Tough is formulated differently! With 2x toughness compared to most water-washable resins, it creates more durable models with a bit of flex*.

Improved Experience, Better Prints

Experience 3D printing the new way with less odor, less alcohol, and an easy-to-print formula. Plus, tougher models mean you dont need to worry about accidental breakage during removal and handling.

Suitable for Various Applications

Whatever you set your mind to, Water-Washable Tough can do!
Small minis, medium figurines, or large statues, everything can be printed with Water-Washable Tough.
If ease of cleaning and alcohol saving are your priorities, you could never go wrong with this resin.

Go to slide 1Go to slide 2

Water-Washable vs. Water-Washable Tough

*Water-Washable Tough resin is tougher than usual water-washable resin but not as tough as typical engineering tough resins.
If your models require higher strength and impact resistance, please check ourRPG Resinorengineering resins.

How to Post-Process Water-Washable Resin

As straightforward as it is, there are always some tips and tricks that will help you navigate your water-washable journey. Learn how to post-process your prints properly, how to handle the wastewater, and more!

1. Remove From Building Plate

2. Wash With Water

*Don’t dump wastewater directly into the drain.

3. Dry and Cure

4. Completed

Cleaning

1. Remove models from the building plate.

2. Wash models in a Washing Station filled with water or 95% ethanol for 4560 seconds. When washing with water, we recommend a final quick rinse with ethanol for cleaner results.

3. After cleaning, leave it to air dry for at least 30 minutes or use a compressed air gun.

*When printing flat on the building plate, remove the printed objects carefully to avoid deformation on the objects.
*If models are hollowed, make sure the inner parts are thoroughly cleaned.
*Do not soak models in solvent for more than 60 seconds to avoid surface damage.

Post-Curing

1. Post-cure the models in post-curing stations like Phrozen Cure or Phrozen Cure Mega S to post-cure the models for 30 min