Phrozen Speed Plus Resin

Maximize Your Speed and Performance

Print Big, Faster

Formulated to print large, Speed Plus Resin combines Sonic Mega 8K Ss fast printing capabilities with an ACF film to complete a 25 cm tall model in just over 5 hours, thanks to its super-fast 1.5 s exposure time for 0.1 mm layer height.

Made for Details, Made for Speed

Compared with other high-speed resins, Phrozen Speed Plus can maintain great details even at 0.1 mm, providing not only speed but also excellent printing quality.

Smooth, Stable, and Swift

With a super low viscosity of only 150 cP, printing large models is smoother, more stable, and faster for a reliable printing performance.

Applications

Suitable for rapid production of cosplay props, terrains, large scale models, and anything big!

Go to slide 1Go to slide 2

Speed Plus vs. Speed

How to Print With Speed Plus

When printing with Phrozen Speed Plus, follow the steps below for a successful print.

1. Choose Your Parameters

Use these parameter settings when printing on Sonic Mega 8K S with ACF film, and feel free to choose whether to print on 0.05 or 0.1 mm layer height based on your needs.

2. Adjust Support

Strengthen your support settings and adjust the models angle to reduce the cross-sectional area to ensure printing stability.

3. Cover the Lid

Always use the UV light cover when printing to avoid resin splashes from rapid movement of the building plate.

4. Check Release Film

Always clean the entire resin vat after each print to ensure there are no hole or tear in the release film.

Note

• Please note that as pulling force from fast printing parameters is bigger than usual, frequent use of fast printing might shorten your release films lifespan. Read more onwhen to replace the release film.
• Rapid lift and retract speed will increase the possibility of shaking lines and printing failures. The smaller the cross-sectional area of the model, the better the printing success rate will be. Please pay attention to your model file preparation and parameter settings and adjust accordingly to ensure printing success.
• The parameter settings above are for Sonic Mega 8K S and ACF Release film with an ambient temperature of 252 and humidity of 5010.
• For more information, please read ouruser guide.