Carvera Air Wired Probe

For Carvera Air only.

Overview:

The wired probe is one of the critical components of Carvera Air which is used for auto-probing and auto-leveling.
There is already one included in the machine for you to use out of the box. But you can prepare a backup one as you wish.

Installation:

The probe is stored on the right side of the spindle by default, and the cable has been connected and is ready for immediate use. The installation and removal method for the wired probe is the same as that for a standard milling bit. Learn more in theinstruction manual.

Note:

Unlike the crash of other milling bits, the crash of a wired probe may cause serious damage to the probe. Please use the wired probe with caution. Always observe its traveling path, and stop the machine when finding any obstacles to protect the wired probe.

Whats In the Box:

- 1 * Wired Probe with 1/8" tail shaft installed
- 1 * 1/8mm spare tail shaft
- 1 * 4mm tail shaft
- 1 * 6mm tail shaft
- 1 * 1/4" tail shaft