Acri-Bond 140 PLA Adhesive

ACRI-BOND 140 is a clear, thickened, PLA cement ideal for gluing the widely used PLA (Polylactic Acid) 3D Printing Filament.

It is fast drying and initial bond is firm within a short amount of time. After drying it leaves approximately 30% solid residue.

ACRI-BOND 140 is the strongest thickened 3D Printing PLA Glue on the market, the bond is stronger than the original plastic and can be applied in many ways making it extremely versatile.

Includes

• 65mL Applicator Bottle + 3 Needles
• Funnel

Description

ACRI-BOND 140 PLA Thickened Solvent Adhesive for PLA 3D Prints

Engineered for PLA and PLA+, ACRI-BOND 140 is a thickened solvent adhesive that provides a strong, durable bond while offering gap-filling capability for 3D-printed parts. The slightly thicker consistency allows for controlled application, making it perfect for assembling, repairing, or reinforcing prints. As a solvent-based adhesive, it fuses the parts together, and when the solvent evaporates away it will leave behind a small layer of clear PLA for a high-strength gap filled joint.

Why Choose ACRI-BOND 140?

• Designed for PLA & PLA+ 3D prints
• Thickened formula for gap-filling and extra durability
• Evaporates completely, leaving a solid, invisible bond
• Slower set time for precise alignment before curing
• Easy application by bottle, syringe, or brush

Perfect for hobbyists, engineers, and professionals who need a strong, lasting bonds for PLA based prints.

Contains

METHYLENE CHLORIDE > 40%.
TRICHLOROETHYLENE < 30%.

Why Choose Our 3D Printing Glues?

• Works with PLA, PLA+, ABS, ASA, and PETG
• Water-thin formula for precision bonding
• Evaporates away, leaving no excess material
• Creates the strongest possible joint where gap-filling isnt needed
• The bond is stronger than the plastic itself, meaning it will not be a failure point.
• Fast-setting for efficient workflows
• Easy application by bottle, syringe, or brush

Ideal for makers, engineers, and professionals who demand flawless, high-strength bonds in their 3D printing projects.

Contains

METHYLENE CHLORIDE > 40%.
TRICHLOROETHYLENE < 30%.

Instructions

Parts to be joined should fit without forcing and be clean, it is recommended to useAcri-Bond Cleanerprior to applying any product to remove any dust and dirt. Apply adhesive with a suitable applicator like the65mL Applicator Bottlesor20mL Syringeswith a0.5mm Blunt Needleand assemble while parts are still wet. Press parts together in firm contact. Acri-Bond 135 forms an initial bond very quickly. Strength develops rapidly reaching full strength in 24 to 48 hours leaving no dry residue. For a tutorial how to use please refer to ourYouTube Channelor in the Videos tab above.