Happymodel Mobula7 Freestyle HD

Notes:

If the betaflight firmware is 4.5.1 and you got failsafe when Core temperature is overheat. Here is the Solution to fix the problem, thanksRyan Quellet
Steps:
Connect to betaflight configurator
Then copy the following command to CLI command:
cpu_overclock = 108MHZ
save

Description:

Happymodel Mobula7 Freestyle BNF is a 75mm ultra light BNF using the HDZero AIO5 designed for freestyle whooping. It is only 24.5 grams. High Speed RS0802 KV25000 brushless motors with HQPROP 1.6inch Tri-blades ultra light propellers, got a better freestyle experience.

Specifications

Weight: 24.5g
Recommended Battery: 1S 450mah/550mah/650mah
Propeller Size: 40mm

Flight time: around 4~5 minutes

Factory SKU:5A10096

AIO flight controller
MCU: STM32F411 (100MHz, 512K Flash)
Gyro: ICM42688P
On board voltage and amperage meters
Built-in 5A(each) BLHeli_S 4-in-1 ESC
Bluejay ESC firmware pre-installed
Built-in 5.8G HDZero VTX
Built-in SPI ExpressLRS 2.4GHz receiver compatible with expresslrs v3.0
Built-in 5V 1A BEC
Board size:28.528.5mm with a 25.525.5 mounting hole size
Betaflight firmware: CRAZYBEEF4SX1280 4.4.2 out of factory
HDZero Lux Camera
Sensor size: 1/2 inch
Resolution: 720p60 4:3 and 16:9
FOV: D:155 H:126 V:94(4:3)
FOV: D:145 H:126 V:70(16:9)
WDR

Motors

Model:RS0802
Kv:25000
Stator diameter: 8mm
Stator length:2mm
Shaft diameter: 1.5mm
Weight:2.0g

Included

1x Happymodel Mobula7 Freestyle BNF 1S
1x Spare canopy
1x Spare propeller(set)
1x Screw driver
1x propeller disassemble tool

Default port and receiver settings:

Default factory Firmware with presettings Betaflgiht 4.5.1AIO5_BF4.5.1Default factory dump file for betaflight 4.5.1

Betaflight 4.5.1 default factory dump for Mobula7 freestyle HD

Default factory Firmware with presettings Betaflgiht 4.4.2

AIO5_BF4.4.2

Default factory dump file for betaflight 4.4.2

Betaflight 4.4.2 default factory dump for Mobula7 freestyle HD

3D Print file for Antenna fixed holder:

Antenna fixed holder for Mobula6 and Mobula7 freestyle HD