Prusa MK3/MK4/Core One Polypropylene Satin Bed

OVERVIEW:

The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.

This print sheet is specially designed to print polypropylene-based filaments, especially thePrusament PP Carbon Fiber Black.The PP-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PP.

The PP sheet has a lightly textured surface finish similar to the Satin Powder-coated Steel Sheet.

You can learn more about the PP sheet inour online help article.

IMPORTANT!

Never clean the PP sheet with acetone! Acetone partially dissolves the sheets surface, leaving stains. It may also negatively affect both adhesion properties and the sheets lifespan. Learn more about printing on the PP sheet inour online help article.

ATTRIBUTES

Perfect for most PP materialsNo need for any separation layerCan be cleaned with IPASupports printing large PP partsSuitable only for PP-based materials, PLA, PETG, and TPU. Other materials tend to detach mid-printCan be damaged with acetone

Notes:

Consumable parts, such as PEI sheets (smooth, textured, PP, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks, or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.

After removing the 3D-printed object, you may notice a visible imprint on the sheets surface. This is only a visual change: it doesnt leave any marks on the next 3D-printed parts and does not affect the printing properties in any way. Therefore its not considered a reason for a warranty claim.

As a result of the temperatures to which the sheet is exposed during printing, some parts of heatbed texture may be imprinted into the sheets bottom side and make some parts slightly glossier. This visual change does not adversely affect the printing properties and is also not considered a reason for a warranty claim.

Example of imprint

Noticeable purge line imprint

Heatbed imprint on the bottom side