RFDesign RFD900x Multi Cable 300mm

Connects an RFD900x or RFD868x telemetry modem to the TELEM port on a Pixhawk/Cube carrier board, with an external SBUS/PPM connection and an external 5V power input.

• 5V supply comes from a separate header, not the carrier board, which is required for full transmit power (30 dBm)
• SBUS/PPM I/O is 3.3V tolerant, can source or sink PPM or SBUS, and can mix formats on either end
• Length: 300 mm, weight: 4 g

Orientation matters: the black triangle goes towards the PIN 1 label on the 16-way header of the RFD900x, with the red wire on pin 4 of the modem. Inserting the cable the wrong way can damage the modem.

Genuine RFDesign part supplied through CubePilot by Rising Sun FPV.