$81.24 $40.62

The Ethix lipo bag specifically designed by Mr Steele himself will warm your packs to optimum ripping temps, tell you what voltage they are, charge your gopro and even feel deluxe against your hands with the robust synthetic suede lined interior.

The internal heating element is designed to run off of a 12V regulator that is built inside. The bag itself is thermally isolated and comes with a sleek zipper to keep all the dirt out, and the high temperature inside. The outer pocket stores your phone while charging, or while you're out and about.

The bag is designed to hold upto 30x 1300mAh 4S or 20x 6S 1300mAhpacks neatly.

Recalibration

  • This is for calibrating ADC(voltage) accuracy in factory or re-calibration after using for a long time.
  • Press & hold button for 2 seconds, it shows "CAL" & then flashing "Hi", apply stable "25.50V", then shot press button, wait for a flashing "Lo", apply stable"10.50V" , short press button and wait for it to finish.
  • if apply voltage is far away from ideal ref voltage, it shows "Err"

Specifications

Height165mm
Width240mm
Depth140mm
Weight440g
Heater target temperature50C / 120F
USB Charger Input3S-6S
USB Charger outputup to 2A
Low Voltage Cutoff voltages3S @ 10.5, 4S @ 14V, 5S @ 17.5, 6S @ 21V
Maximum voltage25.5V
Minimum voltage10.5V

SKU:X60793754 Category:

The Ethix lipo bag specifically designed by Mr Steele himself will warm your packs to optimum ripping temps, tell you what voltage they are, charge your gopro and even feel deluxe against your hands with the robust synthetic suede lined interior.

The internal heating element is designed to run off of a 12V regulator that is built inside. The bag itself is thermally isolated and comes with a sleek zipper to keep all the dirt out, and the high temperature inside. The outer pocket stores your phone while charging, or while you’re out and about.

The bag is designed to hold upto 30x 1300mAh 4S or 20x 6S 1300mAhpacks neatly.

Recalibration

  • This is for calibrating ADC(voltage) accuracy in factory or re-calibration after using for a long time.
  • Press & hold button for 2 seconds, it shows “CAL” & then flashing “Hi”, apply stable “25.50V”, then shot press button, wait for a flashing “Lo”, apply stable”10.50V” , short press button and wait for it to finish.
  • if apply voltage is far away from ideal ref voltage, it shows “Err”

Specifications

Height 165mm
Width 240mm
Depth 140mm
Weight 440g
Heater target temperature 50C / 120F
USB Charger Input 3S-6S
USB Charger output up to 2A
Low Voltage Cutoff voltages 3S @ 10.5, 4S @ 14V, 5S @ 17.5, 6S @ 21V
Maximum voltage 25.5V
Minimum voltage 10.5V

0 reviews for ETHIX Heated Deluxe Lipo Bag V2

There are no reviews yet. Be the first to review this product!

Add a review

Your email address will not be published. Required fields are marked *